Our Products
Our D-SLR Brush® is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the D-SLR Brush® are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the bristles leaving you with a clean sensor.
No sensor cleaning brush will totally eliminate the need for the wet method of sensor cleaning, but with the D-SLR Brush® you won't have to use the wet method as often, saving you time, products and money.
The D-SLR Brush® kit comes complete with 1 D-SLR Brush® & 3 ChamberSwabs® packaged inside of a polyurethane tube for protection and storage while traveling. This kit also comes with printed instructions, all of this inside a resealable, hangable 2 mil plastic bag.
Three Different Sizes, Just One Low Price $24.95 each.
D-SLR 1.5x/1.6x - For Cameras with a 1.5x or 1.6x Sensor
Canon: EOS 400D/Xti, D30 & D60, 10D/20D & 30D, Re
bel XTi, XT 350D, Rebel 300D
Nikon: All Models • Olympus: All Models • Pentax: All Models • Sony-Konica-Minolta: All Models
D-SLR 1.3x - For Cameras with a 1.3x Sensor
Canon: 1D, 1-D Mark II • Fuji: S1, S2 & S3 • Kodak: DCS • Sigma: SD-10 / Foveon X3
D-SLR 1.0x - For Cameras with a Full Frame Sensor
Canon: 1Ds, 1Ds Mark II, EOS 5D • Kodak: 14n, SLR/n, SLR/c • Leica: Digital Modul-R
Note: You can use a smaller brush on a larger sensor, but you can't use a larger brush on a smaller sensor! Example: A brush for the Canon 20D will also work on the Canon 5D but will require extra strokes where the brush for a Canon 5D will not work on a Canon 20D.
Our ChamberSwab® is one of the very few true "PREVENTATIVE" products available for purchase today for assistance in preventing dust from reaching your sensor. The foamed tipped ChamberSwab® with a couple drops of Eclipse® (or equivalent) will help remove the stray dust and excess lubricants from the walls of the mirror cage/chamber. By cleaning the chamber walls, you will reduce the chance of contaminating your sensor cleaning brush and help stop those unwanted critters from falling onto your sensor.
We recommend cleaning the walls of your mirror chamber before every sensor cleaning. It is simple, quick to accomplish and very inexpensive.
The ChamberSwabs® comes packaged in a heavy duty 6 mil resealable zipper bag for protection and storage while traveling. Also included is a set of printed instructions.
Package of 10 ChamberSwabs® $2.95
Package of 50 ChamberSwabs® $12.95